久爱在线中文在观看直播

<tr id="fn4uo"></tr>
    <center id="fn4uo"></center><code id="fn4uo"></code>
      <pre id="fn4uo"></pre>

      <code id="fn4uo"></code>
      1. <code id="fn4uo"></code>
            <tr id="fn4uo"></tr>
            <tr id="fn4uo"></tr>

            Two component airless spraying machine

             
            Dedicated to design for spread two component polysuphide sealant and two component silicone structure glue Both master pump and assisted pump adopt mechanical commutating power unit Typical application: hollow glass and curtain wall glass

            SZB1雙組份玻璃鋼噴涂機
                Model SZB1Two component FBR
            spreading machine

            Model

            SZB1

            Pressure ratio

            16:1

            Displacement

            32L/min

            Air source

            0.6MPa 1600L/min

            Quality

            41kg

            Dimension

            650mm*600mm*1030mm

            Adjustment range

            1.2%-5.2%(Ⅰ) 0.6%-2.6%(Ⅱ)

            Level difference
                      difference

            0.1-0.2%

            Two-component spray unit , with high pressure ratio, wide component ratio and broad range of application. More easy to spray and meter two-component paint. Can spray various two-component , high performance and corrosion-resistance paint .

            SZ6517型雙組份噴涂機
            Model SZ6517Two component
            spray unit

            Model

            SZ6517

            Pressure ratio

            65:1

            Displacement

            17L/min

            Air source

            0.6MPa 2500L/min

            Quality

            90kg

            Dimension

            650mm*600mm*1030mm

            High viscidity spray unit adopt airless pressure feed and air-assisted atomizing to spray .Applicable to spray high viscidity and bad fluidity material, and even can spray new type material which contains The component of short fiber and small grain, including thermo-insulating and sound-deadened coatings, such as asphalt asbestos and asphalt rubber.Typical application: steering room of automobile, locomotive and cabin.
            Model GN-2A High viscidity spray unit
                Model GN-2A High viscidity
            spray unit
            Model GN-2A GN-3A
            Pressure ratio 13:1 27:1
            Displacement 26L/min 30L/min
            Air source 0.6MPa 1600L/min
            Quality 33kg 45kg
            Dimension 550mm*580mm*1000mm
            Print | Favorites this page
            久爱在线中文在观看直播
            <tr id="fn4uo"></tr>
              <center id="fn4uo"></center><code id="fn4uo"></code>
                <pre id="fn4uo"></pre>

                <code id="fn4uo"></code>
                1. <code id="fn4uo"></code>
                      <tr id="fn4uo"></tr>
                      <tr id="fn4uo"></tr>