久爱在线中文在观看直播

<tr id="fn4uo"></tr>
    <center id="fn4uo"></center><code id="fn4uo"></code>
      <pre id="fn4uo"></pre>

      <code id="fn4uo"></code>
      1. <code id="fn4uo"></code>
            <tr id="fn4uo"></tr>
            <tr id="fn4uo"></tr>

            Metal wire spraying machine, flame powder spraying equipment series

                                                                                                             
            Model LSQX-1 Metallic wire spray gun                      

            It employs oxygen-acetylene as heating source and compressed air as power for atomizing, cooling and working of spray gun. After melting of single metallic wire, it sprays to pretreatment surface of workpiece for obtaining ideal coating .Such spray gun can be handhold or fixed  on  machine lathe. It features skilful, flexible, reliable performance  and  low investment .      

            The metallic wire spray gun is  divided into  high/mid speed. Select high speed spray gun when the  melting point of  spraying material is below 750℃; Select mid speed  spray gun when the  melting point is more than 750℃.

            Model LSQX-1 Metal wire spraying gun
                  Model LSQX-1 Metal wire spraying gun
            Model LSQX-2 Metal wire spraying
                  Model LSQX-2 Metal wire spraying gun

            Assisted equipments:
            Dynamic  air compressor + fine filter / cold dryer + pretreatment  spraying  machine / shot blasting machine + bottles of oxygen,  acetylene + nipper  + detecting instrument ,etc;        

            Parameters of air consumable:
            Oxygen consumable:about 1.7m3/h,
            Pressure:0.4-0.6MPa;
            Acetylene consumable:~1.1m3/h,  Pressure:0.07-0.1MPa;
            Air consumable:~7.2m3/h,
            Pressure:0.5-0.6MPa. 
                 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
            Parameters of spraying efficiency
            Material T8 Steel Al  Zn Mo Soft steel Stainless steel Cu Al2O3
            Diameter of gun (mm) ∮2.3 ∮3 ∮3 ∮2.3 ∮2.3 ∮2.3 ∮3 ∮2.3
            Efficiency (kg/h) 1.6 2.7 8.2 0.9 2.0 1.8 4.3 0.4
                                                                                                                                                                                                                                                                                                                                                                  
            Technical parameters of gun
            Weight Dimension Operation mode Dia. of wire Gravitation Speed range Dia. of pellet Angle of spark beam
            1.9kg  90*180*215mm Hand holding/
                          fixed
            ∮2.3-3mm ≥6.5kg Stepless 4-40um ≤4
                 
            Flame powder spraying equipments

            Flame powder spraying equipments
             Such  system is a high speed flame powder spraying device,  which employs  oxygen-acetylene flame as heating source and compressed  air for  improving utilization ratio of flame heat energy and is  provided with  high precise powder feeder. It is composed of high  energy spray gun  ,high precise powder feeder and air supply device  .High energy spray  gun and nozzle are uniquely designed with heat  energy can reach as high  as 26250kcal/h, which shall not generate heat  after long time operation  and without tempering, be applicable to  spray different kinds of  ceramics, metallic and plastic powders .The  high precise powder feeder  adopts boiling bed theory ,which features  high powder feeding precision  (≤±5%),with powder feeding ratio to be  stably adjusted at 0.5-15kg/h.  It can satisfy the needs of long time  spraying .The air supply device  is composed of dedicated flow system  and control cell of compressed air  .This system features high spraying  efficiency ,compact coating ,many  varieties for spraying and  convenient spraying operation, etc. 

            Model LSPFS-1Plastic powder flame spraying equipment is composed of spray gun, powder feeder, pipeline and air valve.       

            Model LSPFS-1 Plastic powder flame spray gun is based on a variety of exclusive plastic powders as spraying materials, adopts oxygen - acetylene flame, propane gas, liquefied petroleum gas as heat source gas. Oxygen - gas mixing and distribution of various types of boiling powder of the spray gun are based on the jet - absorption principle.
             Advanced design and high-precise process make Model LSPFS-1 plastic powder flame spraying equipment work continuously, stably on various occasions .The spray gun adopts powder feeding device of high performance to ensure the spray gun for spraying of all-position. It can be operated more portably and efficiently than imported products.

            It can be applicable to all types of plastic powder spraying and applied to large-scale steel pieces and satisfy the special anti-corrosion requirements for petro-chemical storage tanks, etc. General applied materials: chlorinated polyether nylon, low-pressure polyethylene, polypropylene, polyphenylene sulfide , epoxy powder,etc.

            Print | Favorites this page
            久爱在线中文在观看直播
            <tr id="fn4uo"></tr>
              <center id="fn4uo"></center><code id="fn4uo"></code>
                <pre id="fn4uo"></pre>

                <code id="fn4uo"></code>
                1. <code id="fn4uo"></code>
                      <tr id="fn4uo"></tr>
                      <tr id="fn4uo"></tr>